Price Clear







Showing Gundam Parts product(s)

Showing 181 - 210 of 1136 products

img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Gunner Zaku (Lunamaria Hawke Custom)

[Da Lin] Water Decal for MG 1/100 Gunner Zaku (Lunamaria Hawke Custom)

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Gunner Zaku (Lunamaria Hawke Custom)
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Gundam Astray Red Frame Kai

[Da Lin] Water Decal for MG 1/100 Gundam Astray Red Frame Kai

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Gundam Astray Red Frame Kai
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Blitz Gundam

[Da Lin] Water Decal for MG 1/100 Blitz Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Blitz Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM7.90

[Metal Part] X1 Turbine Thruster for Gundam Kit (1 pair, 2 sets)

[Metal Part]  Metal Turbine Thruster for Gundam Kit (X1)

  • Specifications : Maximum diameter 9mm, Height 10mm, Joint hole Diameter 2.0mm
  • 2 sets (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Die-cast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM9.10
img
SAVERM6.80

[Metal Part] Metal Thruster / Vents for Gundam Kit (G3, Silver) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (G3, Silver)

  • Specifications : Maximum diameter 10mm, Height 10mm, Joint hole Diameter 1.3mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.3mm)
2)Apply cement to ensure the center joint tightened

RM13.20
img
SAVERM6.50

[Metal Part] Metal Thruster / Vents for Gundam Kit (G1, Silver) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (G1, Silver)

  • Specifications : Maximum diameter 6mm, Height 6mm, Joint hole Diameter 1.2mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.2mm)
2)Apply cement to ensure the center joint tightened

RM11.50
img
SAVERM6.50

[Metal Part] Metal Thruster / Vents for Gundam Kit (G2, Silver) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (G2, Silver)

  • Specifications : Maximum diameter 8mm, Height 8mm, Joint hole Diameter 1.3mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.3mm)
2)Apply cement to ensure the center joint tightened

RM12.50
img
SAVERM5.80

[Metal Part] Metal Thruster / Vents for Gundam Kit (Y5, Gold) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (Y5, Gold)

  • Specifications : Maximum diameter 9.5mm, Height 9.0mm, Joint hole Diameter 2.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM8.20
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (Y6, Gold) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (Y6, Gold)

  • Specifications : Maximum diameter 15mm, Height 12mm, Joint hole Diameter 2.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Die-cast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM11.80
img
SAVERM7.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (Y7, Gold) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (Y7, Gold)

  • Specifications : Maximum diameter 12mm, Height 12mm, Joint hole Diameter 2.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Die-cast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM9.80
img
SAVERM11.50

[Metal Part] HG / MG Scale Gundam Model kit Metal Modification Bar / Stick (8 units)

HG / MG scale Gundam Model kit  Metal Tonic

* Detail Modification 
* Universal compatible
* Detail Bar / Pole Decorative Bar

Bar length : 10 mm
Joint Diameter : 1.0mm
8 units in the package

RM6.50
img
SAVERM4.40

[Metal Part] Metal Hydraulic Piston (4 units)

[Metal Part]  Metal Hydraulic Piston

  • Specifications : Maximum diameter 2mm, Total Length 15mm, Joint hole Diameter 1.0mm &                                  Joint hole Length 2.0mm
  • 4 units (2 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Die-cast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.0mm)
2)Apply cement to ensure the center joint tightened

RM5.60
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Aegis Gundam

[Da Lin] Water Decal for MG 1/100 Aegis Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Aegis Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 X-1 Crossbone Gundam

[Da Lin] Water Decal for RG 1/144 X-1 Crossbone Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for RG 1/144 X-1 Crossbone Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for HIRM 1/100 Red Frame

[Da Lin] Water Decal for Hi-Resolution 1/100 Astray Red Frame Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Special design for Hi-Resolution 1/100 Astray Red Frame Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Buster Gundam

[Da Lin] Water Decal for MG 1/100 Buster Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for MG 1/100 Buster Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/00 Duel Gundam

[Da Lin] Water Decal for MG 1/100 Duel Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Duel Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Gundam Astray Blue Frame 2nd Revise

[Da Lin] Water Decal for MG 1/100 Astray Blue Frame 2nd Revise

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Astray Blue Frame 2nd Revise
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Providence Gundam

[Da Lin] Water Decal for MG 1/100 Providence Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Providence Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Justice Gundam

[Da Lin] Water Decal for MG 1/100 Justice Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Justice Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Blast Impulse Gundam

[Da Lin] Water Decal for MG 1/100 Blast Impulse Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for MG 1/100 Blast Impulse Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Gundam Astray Blue Frame D

[Da Lin] Water Decal for MG 1/100 Astray Blue Frame D

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for MG 1/100 Astray Blue Frame D
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Gundam Astray Turn Red

[Da Lin] Water Decal for MG 1/100 Astray Turn Red

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for MG 1/100 Astray Turn Red
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM11.00

[Da Lin] Water Decal for MG 1/100 Powered Gundam Astray Red Frame & 150 Gerbera Straight

[Da Lin] Water Decal for MG 1/100 Powered Gundam Astray Red Frame & 150 Gerbera Straight

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for MG 1/100 Powered Gundam Astray Red Frame & 150 Gerbera Straight
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM16.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Banshee Unicorn

[Da Lin] Water Decal for MG 1/100 Banshee Unicorn

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for MG 1/100 Banshee Unicorn
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM11.00

[Da Lin] Water Decal for MG 1/100 Banshee (Gold Coating)

[Da Lin] Water Decal for MG 1/100 Banshee Unicorn (Gold Coating)

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for MG 1/100 Banshee Unicorn (Gold Coating)
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM16.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Sinanju Stein

[Da Lin] Water Decal for MG 1/100 Sinanju Stein

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for MG 1/100 Sinanju Stein
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Ver. Ka Sazabi

[Da Lin] Water Decal for MG 1/100 Ver. Ka Sazabi

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for MG 1/100 Ver. Ka Sazabi
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 RGM-96X Jesta

[Da Lin] Water Decal for MG 1/100 RGM-96X Jesta

This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for MG 1/100 RGM-96X Jesta- Best use with Mr Hobby Mr. Mark Setter

- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 RGZ-95C ReZEL C Type

[Da Lin] Water Decal for MG 1/100 RGZ-95C ReZEL C Type

This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for MG 1/100 RGZ-95C? ReZEL C Type- Best use with Mr Hobby Mr. Mark Setter- Not pre-cut decal as the Bandai water decal slide- Extra touch of detail for modeling kits- Product from Hong Kong

RM10.00

Showing 181 - 210 of 1136 products